MIC826MYMT-TR

Microchip Technology
998-MIC826MYMTTR
MIC826MYMT-TR

Mfr.:

Paglalarawan:
Supervisory Circuits Voltage Supervisor Watchdog/Dual Output

ECAD Model:
I-download ang libreng Library Loader para i-convert ang file na ito para sa iyong ECAD Tool. Matuto nang higit pa tungkol sa ECAD Model.

May Stock: 3,697

Stock:
3,697 Maaaring Ipadala Agad
Lead-Time ng Pabrika:
8 (na) Linggo Tinatayang oras ng paggawa sa pabrika para sa mga bilang na mas marami kaysa ipinakita.
Minimum: 1   Mga Multiple: 1
Presyo ng Unit:
₱-.--
Ext. Presyo:
₱-.--
Est. Taripa:
Packaging:
Buo Reel (Mag-order sa multiple ng 5000)

Presyo (PHP)

Dami Presyo ng Unit
Ext. Presyo
Cut Tape / MouseReel™
₱24.36 ₱24.36
₱20.30 ₱507.50
₱19.14 ₱1,914.00
Buo Reel (Mag-order sa multiple ng 5000)
₱19.08 ₱95,400.00
† ₱350.00 Idaragdag at kakalkulahin sa iyong shopping cart ang bayarin sa MouseReel™ Hindi makakansela at maisasauli ang mga order na MouseReel™

Katangian ng Produkto Value ng Attribute Pumili ng Attribute
Microchip
Kategorya ng Produkto: Mga Supervisory Circuit
RoHS:  
Voltage Supervisory
SMD/SMT
TDFN-6
4.375 V
1 Input
Active High, Active Low, Push-Pull
Manual Reset
Watchdog
No Backup
200 ms
5.5 V
- 40 C
+ 125 C
0.5 %
MIC826
Reel
Cut Tape
MouseReel
Brand: Microchip Technology
Mga Chip Enable Signal: No Chip Enable
Bansa ng Pag-assemble: Not Available
Bansa ng Diffusion: Not Available
Bansang Pinagmulan: CN
Supply Current ng Pagpapatakbo: 4.8 uA
Power Fail Detection: Yes
Uri ng Produkto: Supervisory Circuits
Dami ng Pack ng Pabrika: 5000
Subcategory: PMIC - Power Management ICs
Supply Voltage - Min: 1 V
Mga Alias ng # ng Piyesa : MIC826MYMT TR
Timbang ng Unit: 50 mg
Nahanap na mga produkto:
Para maipakita ang mga katulad na produkto, pumili ng kahit na isang checkbox man lang
Pumili ng kahit isang checkbox sa itaas para magpakita ng katulad na produkto sa kategoryang ito.
Mga Piniling Attribute: 0

Kailangang i-enable ang JavaScript para gumana ito.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

MIC826 Voltage Supervisors

Microchip MIC826 Voltage Supervisors are a low-current, ultra-small, voltage supervisor with manual reset input, watchdog timer, and active-high and active-low push-pull outputs. The reset outputs are asserted and held when the supply voltage falls below the factory-programmed threshold voltage when the /MR pin is pulled low, or if the watchdog times out. Reset is asserted for the reset timeout delay after the supply voltage increases above the rising threshold voltage or when manual reset input is asserted high. The MIC826 consumes a quiescent current of only 3.8µA and is offered in a tiny, space-saving, 6-pin 1.6mm x 1.6mm Thin DFN package.