INA381A1IDGSR

Texas Instruments
595-INA381A1IDGSR
INA381A1IDGSR

Mfr.:

Paglalarawan:
Current Sense Amplifiers 26-V 350-kHz curren t sense amplifier wi A 595-INA381A1IDGST

ECAD Model:
I-download ang libreng Library Loader para i-convert ang file na ito para sa iyong ECAD Tool. Matuto nang higit pa tungkol sa ECAD Model.

May Stock: 2,558

Stock:
2,558
Maaaring Ipadala Agad
Inoorder:
2,500
Lead-Time ng Pabrika:
6
(na) Linggo Tinatayang oras ng paggawa sa pabrika para sa mga bilang na mas marami kaysa ipinakita.
Minimum: 1   Mga Multiple: 1
Presyo ng Unit:
₱-.--
Ext. Presyo:
₱-.--
Est. Taripa:
Packaging:
Buo Reel (Mag-order sa multiple ng 2500)

Presyo (PHP)

Dami Presyo ng Unit
Ext. Presyo
Cut Tape / MouseReel™
₱41.76 ₱41.76
₱29.58 ₱295.80
₱26.45 ₱661.25
₱23.20 ₱2,320.00
₱21.63 ₱5,407.50
₱20.65 ₱10,325.00
₱19.89 ₱19,890.00
Buo Reel (Mag-order sa multiple ng 2500)
₱19.08 ₱47,700.00
₱18.50 ₱92,500.00
† ₱350.00 Idaragdag at kakalkulahin sa iyong shopping cart ang bayarin sa MouseReel™ Hindi makakansela at maisasauli ang mga order na MouseReel™

Alternatibong Packaging

Mfr. # ng Piyesa:
Packaging:
Reel, Cut Tape, MouseReel
Availability:
May Stock
Presyo:
₱117.16
Min:
1

Katulad na Produkto

Texas Instruments INA381A1IDGST
Texas Instruments
Current Sense Amplifiers 26-V, 350-kHz current sense amplifier with integrated over-current comparator 10-VSSOP -40 to 125
End of Life: Naka-iskedyul para sa kalumaan at ihihinto na ng manufacturer.

Katangian ng Produkto Value ng Attribute Pumili ng Attribute
Texas Instruments
Kategorya ng Produkto: Mga Current Sense Amplifier
RoHS:  
INA381
1 Channel
350 kHz
12 V
100 dB
80 uA
100 uV
5.5 V
2.7 V
350 uA
0.1 %
- 40 C
+ 125 C
SMD/SMT
VSSOP-10
Reel
Cut Tape
MouseReel
3 dB Bandwidth: 350 kHz
Brand: Texas Instruments
Bansa ng Pag-assemble: CN
Bansa ng Diffusion: JP
Bansang Pinagmulan: CN
en - Input Voltage Noise Density: 40 nV/sqrt Hz
Gain V/V: 2 V/V
Ios - Input Offset Current: 50 nA
Maselan sa Moisture: Yes
Produkto: Current Sense Amplifiers
Uri ng Produkto: Current Sense Amplifiers
Shutdown: No Shutdown
SR - Slew Rate: 2 V/us
Dami ng Pack ng Pabrika: 2500
Subcategory: Amplifier ICs
Timbang ng Unit: 33 mg
Nahanap na mga produkto:
Para maipakita ang mga katulad na produkto, pumili ng kahit na isang checkbox man lang
Pumili ng kahit isang checkbox sa itaas para magpakita ng katulad na produkto sa kategoryang ito.
Mga Piniling Attribute: 0

Kailangang i-enable ang JavaScript para gumana ito.

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

INA381/INA381-Q1 Current Sensing Amplifiers

Texas Instruments INA381/INA381-Q1 Voltage Output Current Sensing Amplifiers offer both a 26V common-mode, current-sensing amplifier and a high-speed comparator configured to detect overcurrent conditions. This is achieved by measuring the voltage developed across a current-shunt resistor and comparing that voltage to a defined threshold limit set by the comparator reference pin. The current-shunt monitor can measure differential voltage signals on common-mode voltages. This can vary from –0.2V up to 26V, independent of the supply voltage. The open-drain alert output can be configured to operate in either a transparent mode or in a latched mode. The transparent mode produces an output status that follows the input state. The latched mode sends the alert output until it is cleared when the latch is reset. Allowing for quick detection of overcurrent events, the standalone comparator alert response time is under 3µs. The total system overcurrent protection offered by the device is under 10µs. The Texas Instruments INA381/INA381-Q1 draws a maximum supply current of 350µA while operating from a single 2.7V to 5.5V supply. The specified operating temperature range (–40°C to +125°C). The INA381-Q1 devices are AEC-Q100 qualified for automotive applications.