Lahat ng Resulta (579)

Acceleration Sensor Modules Top exit, broadband high sensitivity, low frequency sensor, M12 connector, 500 mV/g, +/-5% sensitivity tolerance

Acceleration Sensor Modules Top exit, general purpose, 16 integral J9T2A cable, shield not connected to case, 100 mV/g, +/-5% sensitivity tolerance

Acceleration Sensor Modules Top exit, dual output: acceleration, 100 mV/g, +/-5% sensitivity tolerance; temperature, 10 mV/C (2 to 120C), 3 pin MIL-C-5015 connector

Acceleration Sensor Modules Top exit, dual output: acceleration, 100 mV/g, +/-5% sensitivity tolerance; temperature, 10mV/C (2 to 120C), 3 pin MIL-C-5015 connector

Acceleration Sensor Modules Side exit, general purpose, case isolated, MIL-C-5015 connector, 100 mV/g, +/-10% sensitivity tolerance

Acceleration Sensor Modules Top exit, low frequency (0.2 Hz), case isolated, 500 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector

Acceleration Sensor Modules Top exit, triaxial, with 16 integral Teflon cable, armored, 10-32 captive screw, 100 mV/g, +/-10% sensitivity tolerance

Multi-Conductor Cables J9T2A-1000 = 1,000 ft roll

Sensor Hardware & Accessories Flat magnetic mounting base 120 lb force, 1/4-28 tapped hole, non-isolated, 1.5 diameter

Vibration Sensors Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, RMS, 10 g (98 m/sec2), 1/4-28 mounting hole (stud included), MIL-C-5015 connector.

Vibration Sensors Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True Peak (85 C limited), 20 g (196 m/sec2), MIL-C-5015 connector.

Vibration Sensors Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional Velocity, Equivalent Peak, 1.0 ips (25.4 mm/sec), blunt cut cable, 4 meter PVC coated leads standard, add 25.00, up to 75 meters.